gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

ABOUT US
Turbo Hydra-Matic 4L60-E Automatic Transaxle|Page 7623 > < A/C - Insufficient Cooling Diagnosis Table Updated|Page 7618

C 2500 Suburban 2WD V8-5.7L VIN R (1996)

Page 1
background image

Seals and Gaskets: Service and Repair
Turbo Hydra-Matic 4L60-E Automatic Transaxle

1. Remove driveshaft, and tunnel strap, if equipped.
2. Using suitable tool, pry out lip oil seal.
3. Coat outer casting of new oil seal with suitable sealer and drive into place with seal installer tool No. J-21426 or equivalent.
4. Install tunnel strap if used, then install driveshaft.

Turbo Hydra-Matic 4L60-E Automatic Transaxle|Page 7623 > < A/C - Insufficient Cooling Diagnosis Table Updated|Page 7618