C 2500 Truck 2WD V8-379 6.2L DSL VIN J FI (1986)
E.
Let dry for 24 hours - or flash for 30 minutes, force dry at 140 degrees for 30 minutes, and allow to cool for 30 minutes before mounting.
IV. Wheel Installation
A.
Rebalance tire/wheel assemblies by replacing the original balance weights with nylon-coated weights.
B.
Install tire/wheel assembly onto vehicle.
Required Materials
Amchem Alumi Prep #33 - stock #DX533 or equivalent - cleaning and conditioning chemical for aluminum.
Amchem Alodine #1001 - stock #DX50T or equivalent - coating chemical for aluminum.
Ditzler Delclear Acrylic Urethane Clear - stock #DAU-75 or equivalent.
Ditzler Delthane Ultra-Urethane Additive - stock #DXR-80 or equivalent.
Nylon-coated weights-One possible source for these parts is WDDGM in 1/4 ounce increments ranging from 1/4 ounce to 3 ounces, P/N 9591358
through 9591367, inclusively.
Labor Operation Number:
T1170
Labor Time:
1.7 Hours
Add:
Each additional wheel - 1.5 hours.
Material Allowance - $3.75 per wheel