C 2500 Truck 2WD V8-454 7.4L VIN N TBI (1995)
Important:
Cruise control module ribbon must not be twisted when installed to cruise control module.
2.
Install cruise control module per Section 9B of the Service Manual.
3.
Connect cruise control cable end fitting to throttle body lever stud.
If vehicle is equipped with accelerator control/cruise control cable adjuster (throttle relaxer), connect cruise control cable end fitting to adjuster.
Note correct location of pulley for end fitting.
4.
Adjust cruise cable per "Cable Assembly Adjustment" procedure in Section 9B of the Service Manual.
Important:
Excessive cable slack in cruise control cable will result in perceived slow module response.
PARTS INFORMATION
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty, use:
Labor
Operation
Description
Labor Time
R1220
Module, C/C Replace
Use Published Labor Operation time