gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Airbags - Revised Module Replacement|Page 444 > < Airbags - Revised Module Replacement
Page 2
background image

^

Disable the SIR system, refer to Disabling the SIR System in Section 9J of the Service Manual.

1.

Roll forward the instrument panel, refer to Section 8C of the Service Manual.

2.

The fasteners attaching the inflatable restraint I/P module to the mounting bracket.

3.

The inflatable restraint I/P module from the front of the instrument panel, taking care to keep a firm hold of the module.

4.

The yellow 2-way electrical harness connector at the left side of the mounting bracket.

5.

The Connector Position Assurance (CPA) from the yellow 2-way electrical harness connector.

6.

The inflatable restraint I/P module yellow pigtail connector from the yellow 2-way electrical harness connector.

7.

The inflatable restraint I/P module from the instrument panel.

Caution: 

When you are carrying an undeployed inflator module:

^

Do not carry the inflator module by the wires or connector on the inflator module.

^

Make sure the bag opening points away from you.

When you are storing an undeployed inflator module, make sure the bag opening points away from the surface on which the inflator module rests. When
you are storing a steering column, do not rest the column with the bag opening facing down and the column vertical. Provide free space for the air bag to
expand in case of an accidental deployment. Otherwise, personal injury may result.

Install or Connect

1.

The inflatable restraint I/P module yellow pigtail connector to the yellow 2-way electrical harness connector.

2.

The Connector Position Assurance (CPA).

3.

The yellow 2-way electrical harness connector to the mounting on the left side of the mounting bracket.

4.

The two new retainer J-clips to the mounting bracket.

5.

The inflatable restraint I/P module to the mounting bracket through the front of the instrument panel, using the two retainer J-clips to hold the
inflatable restraint I/P module in position.

6.

The fasteners to the inflatable restraint I/P module.

Tighten

The fasteners to 10 N.m (89 lb. in.).

7.

Roll forward the instrument panel, refer to Section 8C of the Service Manual.

Enable the SIR system, refer to Enabling the SIR System in Section 9J of the Service Manual.

Airbags - Revised Module Replacement|Page 444 > < Airbags - Revised Module Replacement