C 2500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2001)
5. Install the upper valve rocker arm cover.
6. Install the upper valve rocker arm cover bolts.
Use the bolt tightening sequence. Bolts number 1 and 2 are used to position the valve rocker arm cover.
6.1.
Tighten the upper valve rocker arm cover bolts to 8 Nm (71 inch lbs.) in the sequence shown.
6.2.
Tighten the upper valve rocker arm bolts again to 8 Nm (71 inch lbs.) in the sequence shown.
7. Install the fuel injector lines.
8. Connect PCV hoses to the upper valve rocker arm cover.