C 2500 Truck 2WD V8-8.1L VIN G (2002)
7. Coat the dust seal (2) with grease.
8. Install the dust seal (2) onto the steering gear housing (1).
9. Install the pitman shaft boot (3) onto the steering gear housing (1).
Important: Do not install the lock washer and nut until all components have been installed onto the steering gear housing.
10. Install the pitman shaft and the side cover.
11. Install the pitman arm (4) to the steering gear.
12. Install the lock washer (2).
13. Install the nut (3).
14. To adjust the pitman shaft, refer to Pitman Shaft Over-Center Preload Adjustment - Off Vehicle (700 Gear).
Rack and Pinion
Power Steering Gear Replacement (Rack and Pinion)
Removal Procedure