C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
5. Install the axle shaft.
6. Adjust the park brake shoe.
7. Install the rotor.
8. Install the park brake cable to the mounting bracket until the locking tabs snap into place.
9. Install the rear park brake cable to the park brake actuator lever.
10. Tighten the nut to the intermediate cable at the equalizer.
^
Tighten the nut to 3.5 Nm (31 inch lbs.).
11. Install the tire and wheel assembly.
12. Remove the safety stands.
13. Lower vehicle.
14. Adjust park brake cable.