C 2500 Yukon XL 2WD V8-6.0L VIN U (2001)
6. Remove the fuel tank.
7. Remove the rear EVAP pipe (1) from the fuel sender (2), the fuel tank roll over valve (3) and the fuel tank clips (6).
8. Cap the fuel sender EVAP pipe and the fuel tank roll over valve.
Rear EVAP Fuel Tank Pipe Installation Procedure
1. Remove the caps from the fuel sender EVAP pipe and the fuel tank roll over valve.
2. Connect the rear EVAP pipe (1) to the fuel sender (2), the fuel tank roll over valve (3), and the fuel tank clips (6).
