C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
7. Disconnect the cable end from the hood latch assembly.
1. Use needle nose pliers to squeeze the tabs in order to remove the cable end from the handle.
2. Lift the cable from the lock.
Installation Procedure
1. Insert and pull the cable toward the front of the vehicle through the hole in the cowl.
2. Ensure that the grommet is seated.
3. Attach the cable end to the latch assembly.
4. Attach the cable to the retainer clips.
5. Attach the cable end to the cable handle.