C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Carpet: Removal and Replacement
Carpet Replacement - Front (Utility)
Carpet Replacement - Front (Utility)
Removal Procedure
1. Remove the front seats.
2. Remove the rear seats.
3. Remove the front center seat.
4. Remove the floor center console, if equipped.
5. Remove the lower bracket from the IP to the floor to allow carpet removal.
6. Remove the door sill trim plates.
7. Remove the hinge pillar trim panels from both sides.
8. Remove the garnish molding center pillar trim.
9. Remove the carpet.
Installation Procedure
1. Install the carpet.
2. Install the garnish molding center pillar trim.
3. Install the hinge pillar trim panels.
4. Install the door sill trim plates.
5. Install the lower bracket from the IP to the floor.
6. Install the floor center console, if equipped.
7. Install the front center seats, if equipped.
8. Install the rear seats.
9. Install the front seats.
Carpet Replacement - Rear
Carpet Replacement - Rear
Removal Procedure
1. Remove the rear seat.
2. Remove the second rear seat, if equipped.