C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
1. Align the retainers with the holes in the liftgate.
2. Apply pressure to the seat retainers.
3. Install the expanding plastic retainers at the window latch close-out.
Garnish Molding Replacement - Windshield Pillar
Garnish Molding Replacement - Windshield Pillar
Removal Procedure
1. Pull the molding straight out in order to release the retainers.
2. Remove the windshield garnish molding.
Installation Procedure
1. Ensure the bottom of the molding is seated in the slots on the I/P.
2. Align the molding retainers to the slots.
3. Press the moldings straight in till fully seated.
Panel Replacement - Cargo Box Bridge Center (Avalanche)
Panel Replacement - Cargo Box Bridge Center (Avalanche)
Removal Procedure
1. Ensure that the headlamp switch is in the OFF position.
2. Remove the rear compartment cover assembly.