C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
3. Install the rear cargo box side drain cup retainers.
4. Tighten the fastener.
Tighten the fastener to 1.2 N.m +2 or -2 (10 in lbs).
5. Close the mid gate.
Cargo Cover Compression Latch Replacement
Cargo Cover Compression Latch Replacement
Removal Procedure
1. Lower the end gate.
2. Remove the cargo cover assembly from the vehicle.
3. Remove the latch fastener.
4. Remove the latch from the cargo cover.
Installation Procedure
1. Install the latch to the cargo cover.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the fasteners to the latch.
Tighten the fasteners to 6 N.m (53 lb in).
3. Install the rear compartment cover assembly to the vehicle.
Deflector Replacement - Body Side Rear Drain
Deflector Replacement - Body Side Rear Drain
Removal Procedure