C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
8. Remove the drain hose and grommet from the inner fender wheelwell.
9. Remove the duct assembly from the vehicle.
Installation Procedure
1. Install the duct assembly to the vehicle.
2. Insert the drain hose through the inner fender wheel well and forward of the rear wheel..
3. Insert the push-pin retainers to the duct assembly.
4. Install the cargo box stowage box.
5. Install the cargo box stowage lid assembly.
6. Install the rear body side drain deflector.
7. Install the assist handle.
8. Install the rear compartment cover assembly.
9. Close the endgate.
Grate Replacement - Load Floor Water Management (Avalanche)
Grate Replacement - Load Floor Water Management (Avalanche)
Removal Procedure
1. Remove the rear compartment cover assembly.
2. Remove the load floor mat from the vehicle.
3. Pull up on the grate panel in order to remove.
4. Remove the bolts from the panel assembly - load floor trim.
5. Remove the panel from the vehicle.
Installation Procedure
