C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
8. Install the EHCU to the vehicle frame (5).
9. Install the EHCU bracket bolts.
Tighten the EHCU bracket bolts (4) to 25 Nm (18 ft. lbs.).
10. Connect the 2 electrical harness connectors to the EBCM (1).
Important: The brake pipes are held in place by a plastic bracket mounted to the frame. Make sure that the brake pipes stay in the correct place for
proper reassembly.
11. Install the brake pipes to the BPMV (2).
Tighten the brake pipe fittings to 25 Nm (18 ft. lbs.).
12. Bleed the brake system.
13. Bleed the brake system.
