C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Parking Brake Cable: Service and Repair
Park Brake Cable Guide Replacement
Park Brake Cable Guide Replacement
Removal Procedure
1. Release the parking brake.
2. Raise and support the vehicle. Refer to Vehicle Lifting.
3. Remove the park brake cable guide bolt from the frame.
4. Remove the park brake cable guide.
5. Remove the park brake guide from the park brake cable.
Installation Procedure
1. Install the park brake cable guide to the park brake cable.
2. Install the park brake cable guide.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the park brake cable guide bolt to the frame.
Tighten the bolt to 12 Nm (106 inch lbs.).
4. Remove the safety stands.
5. Lower the vehicle.