C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Traction Control Switch: Service and Repair
Traction Control
Traction Control Switch Replacement (Traction Control)
Removal Procedure
1. Remove instrument panel (IP) bezel.
2. Gently lift the switch retaining tabs (1) and remove the traction control switch (2) from the Instrument Panel (IP) assembly (3).
3. Disconnect the harness connector from the traction control switch.
Installation Procedure
1. Connect the harness connector to the traction control switch.
2. Install the traction control switch (2) into the instrument panel (IP) assembly (3), making sure that all of the switch retaining tabs (1) are engaged.
3. Install Instrument Panel (IP) bezel.