C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Camshaft: Service and Repair
Camshaft Replacement
Removal Procedure
1. Remove the grille.
2. Remove the air conditioning (A/C) condenser.
3. Remove the valve lifters.
4. Remove the timing chain and sprocket.
5. Remove the camshaft retainer bolts.
6. Remove the camshaft retainer.
7. Install three 8 - 1.25 x 100 mm bolts into the camshaft front bolt holes.
8. Using the bolts as a handle, carefully rotate and pull the camshaft out of the engine block.
9. Remove the bolts from the front of the camshaft.
10. Clean and inspect the camshaft.
Installation Procedure
