C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
3. Position the engine mount to engine (left side shown, right side similar).
4. Loosely install the engine mount-to-engine bolts.
Notice: Refer to Fastener Notice in Service Precautions.
5. Tighten the engine mount bracket through bolts and engine mount-to-engine bolts.
-
Tighten the engine mount bracket through bolts to 75 Nm (55 ft. lbs.).
-
Tighten the engine mount-to-engine bolts to 50 Nm (37 ft. lbs.).
6. Install the engine shield and bolts.
-
Tighten the engine shield bolts to 20 Nm (15 ft. lbs.).
7. Lower the engine.
8. if equipped, install the oil pan skid plate and bolts.
-
Tighten the oil pan skid plate bolts to 20 Nm (15 ft. lbs.).