C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
7. Install the engine mount to engine mount bracket bolts.
8. Install the engine mount heat shield and bolts.
9. Remove the engine lift hooks from the cylinder heads.
10. Raise the vehicle and support with safety stands.
11. Install the engine oil cooler lines to the engine block.
12. Install the bolts from the transmission to the engine.
13. Install the torque converter bolts.
14. Install the catalytic converter.
15. Install the exhaust manifold pipe.
16. Install the hoses to the power steering pump.
17. Install the starter motor.
18. Lower the vehicle.
19. Route the engine electrical harness.
20. Install the generator.