C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Discharge Air Temperature Sensor / Switch: Service and Repair
Air Temperature Sensor Replacement - Lower Auxiliary
REMOVAL PROCEDURE
1. Remove the right side C-Pillar Trim Panel.
2. Disconnect the electrical connector from the auxiliary lower A/C temperature sensor (10).
3. Remove the auxiliary lower A/C temperature sensor (10) from the air distribution duct.
INSTALLATION PROCEDURE
1. Install the rear lower A/C temperature sensor (10) to the air distribution duct.
2. Connect the electrical connector to the rear lower A/C temperature sensor (10).
3. Install the right side C-Pillar Trim Panel.