C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
Solar Sensor: Service and Repair
SUN LOAD SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel upper trim pad.
2. Turn the Sun Load Sensor (2)1/4 turn and remove it from the upper trim pad.
3. Disconnect the electrical connector.
INSTALLATION PROCEDURE
1. Connect the electrical connector.
2. Install the sun load sensor (2) to the upper trim pad turning it 1/4 turn to secure it in place.
3. Install the instrument panel upper trim pad.