C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
![background image](/gmc/c_2500_yukon_xl_2wd/v8-8.1l_vin_g/Page-1950003.png)
INSTALLATION PROCEDURE
1. Install the starting and charging center bracket assembly to the front fender.
NOTE: Refer to Fastener Notice in Service Precautions.
2. Install the 4 retaining bolts (1).
Tighten
Tighten the 4 retaining bolts (1) to 9 N.m (80 lb in).
3. Align the electrical center block (1) stubs in the slots so that the tabs (2) retains it in place.