C 2500 Yukon XL 2WD V8-8.1L VIN G (2002)
1. If you put the child seat in the 2nd seat center folding position or in the 2nd seat left folding position, use the 3rd seat center occupant lap belt latch
plate if the seat is unoccupied.
2. If you put the child seat in the 2nd seat right folding position, use GM P/N 15971501 in order to latch the tether to the 3rd seat buckle directly
behind this child seat position if the seat is unoccupied.
3. If you put the child seat in the 3rd seat center, use GM P/N 15989781 to the rearmost set of the cargo tie downs. Hook the top tether to the plate at
the center of the tether.
4. If you put the child seal in the 3rd seat left, use the left rear cargo tie down. If you put the child seat in the 3rd seat right, use the right rear cargo tie
down.
5. If all seats are occupied, then place the child seat in a rear seat position that will allow the use of the cargo tie downs.
For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID See: Application and ID