gmc Workshop Repair Guides

GMC Workshop Service and Repair Manuals

Child Seat Tether Outer Hardware Kit|Page 10612 > < Child Seat Tether Outer Hardware Kit|Page 10610
Page 6
background image

1. If you put the child seat in the 2nd seat left folding position, use the left front cargo tie down (Suburban without 3rd folding seat).

2. If you put the child seat in the 2nd seat right folding position, use the right front cargo tie down (Suburban without 3rd folding seat).

3. If you put the child seat in the 3rd seat left (Suburban with 3rd seat) or in the 2nd seat loft (Utility), use the left rear cargo tie down.

4. If you put the child seat in the 3rd seat right (Suburban with 3rd seat) or in the 2nd seat right (Utility), use the right rear cargo tie down.

For a description of the RPO Code(s) shown in this article/images refer to the RPO Code List found at Vehicle/Application ID  See: Application and
ID

Utility-4-Door With 2ND Folding Seat (AM7)

SUBURBAN WITH 2ND FOLDING SEAT (AT5), UTILITY-4-DOOR WITH 2ND FOLDING SEAT (AM7)

1. Position the child seat in the front seat right. Use GM P/N 15971501 in order to latch the tether to the buckle on the 2nd 40 percent seat if the seat

is unoccupied.

Child Seat Tether Outer Hardware Kit|Page 10612 > < Child Seat Tether Outer Hardware Kit|Page 10610