C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
7. Install the push rod, with the painted or marked end up to the engine block.
Notice: Improper installation of the valve rocker arm shaft bolts may cause valve rocker arm shaft breakage and piston to valve contact.
8. Install the valve rocker arm shaft assembly to the cylinder head.
Notice: Refer to Fastener Notice in Service Precautions.
9. Install the valve rocker arm shaft bolts to the cylinder head.
Tighten the bolts to 55 Nm (40 ft. lbs.).
10. Install the valve rocker arm cover to the cylinder head.
11. Connect both the battery negative cables to the batteries.