C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Oil Line: Service and Repair
Engine Oil Cooler Hose/Pipe Replacement
Removal Procedure
1. Pull the plastic cap back along the pipe in order to remove the plastic cap from the connector fitting.
2. Use a small, pick-type tool or screwdriver in order to release one of the open ends of the retaining clip from the connector fitting.
3. Rotate the retaining clip out of position on the connector fitting and remove the clip.
4. Discard the retaining clip.
5. If equipped with a 6.5L engine, remove the oil cooler line clip.