C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Timing Cover: Service and Repair
Engine Front Cover Replacement
^
Tools Required
-
J22102 Seal Installer
Removal Procedure
1. Disconnect both the battery negative cables from the batteries.
2. Remove the generator bracket from the engine block.
Important: When performing this service procedure, it is not necessary to evacuate the air conditioning compressor system. Just move the A/C
compressor to the side and secure out of the way.
3. Remove the air conditioning compressor from the engine lift bracket.
4. Remove the engine oil fill tube from the engine front cover.
5. Remove the engine lift bracket from the engine block.
6. Remove the water pump from the engine front cover.
7. Remove the crankshaft balancer from the crankshaft.