C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
2. Install the exhaust manifold bolts and stud/nuts.
Tighten the bolts and stud/nuts to 35 Nm (26 ft. lbs.).
3. Install the exhaust crossover pipe to the exhaust manifolds.
4. Install a new seal to the removed exhaust crossover pipe.
5. Install the exhaust crossover pipe to the exhaust manifold.
6. Install the exhaust crossover pipe bolts.
Tighten the both sides crossover pipe bolts to 35 Nm (25 ft. lbs.).
7. Install the heat shield to the center of the exhaust manifold.
Tighten the bolts and stud/nuts to 50 Nm (37 ft. lbs.).