C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Glow Plug: Service and Repair
Glow Plug - Bank 1
TOOLS REQUIRED
J 39083 Glow Plug Connector Remover and Installer
REMOVAL PROCEDURE
CAUTION: Refer to Battery Disconnect Caution in Service Precautions.
1. Remove the negative battery cables.
2. Remove the glow plug lead wires using the J 39083 and installer.
3. Remove the glow plugs (1) from cylinders 1, 3, 5 and 7.
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Service Precautions.
1. Install the glow plugs (1).
Tighten
Tighten the glow plugs to 17 N.m (13 lb ft).
2. Install the lead wires to the glow plugs.
3. Install the negative battery cables.