C 3500 HD Truck 2WD V8-6.5L DSL Turbo VIN F (2001)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Shock Absorber Replacement
Shock Absorber Replacement
Removal Procedure
Notice: Original equipment shock absorbers serve additionally as suspension drop cutoffs. Replacement shock absorbers must have a built in
suspension cutoff feature and must not be longer than original shocks when they are fully extended or serious vehicle or component damage could
result.
1. Raise the vehicle. Support the vehicle with suitable safety stands. Refer to Vehicle Lifting.
2. Remove the following parts from the frame:
-
The upper shock nut (3)
-
The bolt (1)
3. Remove the following parts from the axle bracket:
-
The lower shock nut t6)
-
The lower shock washer (5)
-
The lower shock bolt (2)
4. Remove the shock absorber (4) from the vehicle.
Installation Procedure
1. Install the shock absorber (4) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the following parts: