C 3500 Truck 2WD V8-379 6.2L DSL (1986)
VALVE ASSEMBLY
5.
Inspect the casting and fluid passages for foreign materials that may have accumulated in pockets. Remove the foreign material with a small
screwdriver or an awl. (Refer to Figure 1)
6.
As necessary, repeat the washing and drying procedures as described in Steps #3 and #4 until all foreign materials are removed.
-VALVE TRAIN
7.
While applying a slight pressure with your finger against spring force in the valve train, remove the coiled spring pin, sleeve or clip that retains the
valve trains. (Refer to Figure 2)