C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
Trailer Connector: Description and Operation
Two trailer harnesses are available: the heavy-duty trailer towing (UY7) harness and the camper (UY1) harness.
Pickup Trailer Harness Routing
PICKUP TRAILER HARNESS ROUTING
Suburban/Utility Trailer Harness Routing
SUBURBAN/UTILITY TRAILER HARNESS ROUTING
The option UY7 trailer harness is for heavy-duty towing applications. A 30-amp fused battery teed wire and auxiliary circuit routes from the
cowl-mounted junction block, along the body side rail, to the rear bumper crossmember. The harness for the brake/parking lamps is spliced from the rear
lamp harness. The harness is at the rear bumper crossmember. A plastic strap binds the harness. Tape wrapped around the harness prevents short circuits.
The 8 wires have the following functions:
^
Orange - The 30-amp fused battery feed
^
Blue - An auxiliary circuit for electric trailer brakes
^
Brown - The taillamps and the license lamps
^
Light green - The backup lamps
^
Dark green - The right turn signal and the stoplamp
^
Yellow - The left turn signal and the stoplamp
^
White (heavy gage) - Ground
^
White (light gage) - The center high-mounted stop lamp
The UY7 option does not include a connector at the end of the harness. A qualified technician must wire the connector following production.
1. Attach the trailer harness wiring to the trailer
2. Strap the harness wiring to the vehicle in a manner that allows slack in order to prevent the following conditions:
^
Bending
^
Binding