C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
^
Breaking
^
The harness drags on the ground.
3. Secure with tape or straps the trailer portion of the harness to the trailer tongue in order to prevent the harness from dragging on the ground.
4. Secure the harness when the harness is not in use.
4.1. Wrap the harness together.
4.2. Bind the harness with a tie strap in order to avoid damage.
4.3. Store the harness behind the rear bumper on the fuel tank.
4.4. Strap the harness with a band or a tie strap.
The second wiring harness option is the UY1 camper wiring harness. The UY1 harness is under the vehicle. The harness is inside the frame rail. The
harness is even with the front of the pickup box on the driver's side.
The UY1 harness is for the brake/parking lamps. The harness has an auxiliary power feed.
The wires have the following functions:
^
Dark blue - A 30-amp fused auxiliary power circuit. The other end of the wire is taped to the wiring near the junction block on the cowl.
^
Dark green - The right turn signal and the stoplamp
^
Light green - The backup lamps
^
Yellow - The left turn signal and the stoplamp
^
Brown - The taillamps
^
White - Ground
1. Route the trailer harness wiring between the frame and the bumper, or the camper and the body, in such a manner that slack remains in the harness
in order to prevent the following conditions:
^
Bending
^
Binding
^
Breaking
^
The harness drags on the ground.
2. Tape or strap the trailer portion of the harness (if used) to the vehicle in order to prevent the harness from dragging.
3. Secure the harness when the wiring is not in use.
3.1. Wrap the harness together.
3.2. Bind the harness with a tie strap in order to prevent damage.
