C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
INSTALLATION PROCEDURE
1. Install the new bushings and the bolt seals.
2. Lubricate the bushings and the mounting bolt seals with GM P/N 18010909 or the equivalent.
3. Install the new bolt boots (1), (2).
4. Install the caliper.
5. Fill both housing cavities between the bushings with GM P/N 18010909 or the equivalent.
NOTICE: Refer to Fastener Notice in Service Precautions.
6. Install the mounting bolt and the sleeve assemblies.
^
Tighten the bolt to 51 Nm (38 ft. lbs.). The bolts boots must remain secure after tightening the bolts.
7. Connect the brake hose to the caliper.
^
Tighten the brake hose bolt to 45 Nm (33 ft. lbs.).