C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
14. Remove the oil from the sealing surfaces. Refer to Oil Pan Clean and Inspect.
INSTALLATION PROCEDURE
IMPORTANT: The oil pan gasket is reusable. Replace only if the gasket is damaged.
1. Install the oil pan gasket on the oil pan.
2. Install the oil pan gasket and oil pan to the engine block.
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the oil pan bolts to the engine block.
^
Tighten the bolts to 25 Nm (18 ft. lbs.)
4. Install the clutch assembly to the flywheel. Refer to Clutch Assembly Replacement in Transmission and Drivetrain.
5. Install the flywheel to the crankshaft. Refer to Engine Flywheel Replacement.
6. Install flywheel inspection cover to the transmission.
7. Install the transmission in the vehicle.
8. For the automatic transmission. Refer to Transmission Replacement or Transmission Replacement in Transmission and Drivetrain.
9. For the manual transmission. Refer to Transmission Replacement in Transmission and Drivetrain.