C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
INSTALLATION PROCEDURE
NOTE: Refer to Fastener Notice in Cautions and Notices.
1. Install the starter heat shield as necessary to the starter.
Tighten
-
Tighten the starter shield bolts to 3 N.m (35 lb in).
-
Tighten the starter shield nut to 5 N.m (44 lb in).
2. Install the starter to the engine with shims as necessary.
3. Install the starter mounting bolts and washers through the starter to the engine.
Tighten
Tighten the starter mounting bolts to 50 N.m (37 lb ft).