C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
4. Remove the tie rod arm (4).
INSTALLATION PROCEDURE
1. Install the tie rod arm (4) to the knuckle (5).
2. Install the tie rod arm bolts (3).
-
Tighten the tie rod arm bolts to 660 Nm (490 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the tie rod ball joint (7) to the tie rod arm (8).
4. Install the tie rod ball joint nut (1).
-
Tighten the ball joint nuts on all other axle assemblies to 160 Nm (120 ft. lbs.).
Important:
-
Advance the tie rod ball joint nut to the nearest cotter pin slot.
-
Do not back off a tie rod ball joint nut in order to insert a cotter pin.
5. Install the new cotter pin (2).
6. Adjust the toe-in.
