C 3500 Truck 2WD V8-454 7.4L VIN J SFI (1999)
Installation Procedure
^
Tools Required
-
J 22834 Extension Housing Seal Installer
1. Using J 22834 install the new rear oil seal into the extension housing.
2. Ensure J 22834 is centered on the seal during installation.
3. If the vehicle is equipped with a P model NV4500 transmission, perform the following:
3.1.
Install the spline seal.
3.2.
Install the washer.
3.3.
Install the mainshaft nut.