C 3500 Truck 2WD V8-6.0L VIN U (2001)
Cruise Control Servo Cable: Adjustments
The cruise control cable lash should be automatically set at 3.25 mm (0.128 in) with tolerance limits of 0-6 mm (0-0.2 in) when the cable is installed. If
an adjustment is necessary, use the following procedure:
NOTE: Do not remove the C-clip from the cruise control connector. The C-clip was not designed for removal. Damage may occur when removing.
1. Rotate the black plastic screw in order to obtain the correct adjustment.
2. Stop rotating with the screw resting in a detent position.
