C 3500 Truck 2WD V8-6.6L DSL Turbo VIN 1 (2002)
11. Remove the lower ball joint retaining nut.
12. Disconnect the lower ball joint stud from the steering knuckle using J 43631 and J 45851.
13. Remove the lower control arm.
Installation Procedure
1. Install the lower control arm.
2. Connect the ball joint stud to the steering knuckle.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the lower ball joint retaining nut.
^
Tighten the nut to 100 Nm (74 ft. lbs.).
