C Yukon 2WD V8-5.7L VIN R (1999)
Glove Compartment: Service and Repair
Instrument Panel (I/P) Compartment Replacement
REMOVAL PROCEDURE
1. Roll the instrument panel. Refer to IP Assembly - Rotating. See: Dashboard / Instrument Panel/Service and Repair/Instrument Panel (I/P) -
Assembly Rotating
2. Remove the four nuts that retain the instrument panel compartment assembly to the carrier.
3. Remove the instrument panel compartment from the instrument panel.
4. Remove the distorted clips from the IP.
INSTALLATION PROCEDURE
1. Install the instrument panel compartment into the instrument panel.
NOTE: Refer to Fastener Notice in Cautions and Notices.
2. Install the four nuts that retain the instrument panel compartment assembly to the carrier.
Tighten
Tighten the nuts to 10 N.m (89 lb in).
3. Roll the instrument panel back into place and secure. Refer to IP Assembly - Rotating. See: Dashboard / Instrument Panel/Service and
Repair/Instrument Panel (I/P) - Assembly Rotating