C Yukon 2WD V8-5.7L VIN R (1999)
9. Remove the bolt (2).
10. Remove the support key (3) and the spring (4).
11. Drive out the support key using a brass punch and a hammer.
12. Remove the caliper assembly (1).
13. Inspect the inside of the caliper assembly for signs of fluid leakage. Refer to Brake Caliper Overhaul (Rear- Front Bendix) if any leakage is
detected.
14. Use a wire brush to remove any corrosion from the machined surfaces of the anchor plate and the caliper.
INSTALLATION PROCEDURE