C Yukon 2WD V8-5.7L VIN R (1999)
INSTALLATION PROCEDURE
1. Install the bulb.
2. Install the lens to the lamp assembly.
3. Install the wiring to the back of the lens assembly.
License Lamp Replacement (Cab/Chassis W/ Platform Hitch)
REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the lens (1) from the lamp assembly.
3. Remove the bulb.
INSTALLATION PROCEDURE
1. Install the bulb.
2. Install the lens (1) to the lamp assembly.
3. Install the wiring to the back of the lens assembly.