C Yukon 2WD V8-5.7L VIN R (1999)
Notice: The use of non-GM original equipment wheels may cause:
^
Damage to the wheel bearing, the wheel fasteners and the wheel
^
Tire damage caused by the modified clearance to the adjacent vehicle components
^
Adverse vehicle steering stability caused by the modified scrub radius
^
Damage to the vehicle caused by the modified ground clearance
^
Speedometer and odometer inaccuracy
Important:
^
Replacement wheels must be equivalent to the original equipment wheels in the following ways:
-
Load capacity
-
Wheel diameter
-
Rim width
-
Wheel offset
-
Mounting configuration
^
A wheel of incorrect size or type may effect the following conditions:
-
Wheel and hub-bearing life
-
Brake cooling
-
Speedometer/odometer calibration
-
Vehicle ground clearance
-
Tire clearance to the body and the chassis
4. Replace the wheel if the wheel is bent. Replace the wheel if the wheel/nut boss area is cracked.
Identify steel wheels with a 2 or 3 letter code stamped into the rim near the valve stem. Aluminum wheels have the code, the part number, and the
manufacturer identification cast into the back side of the wheel.