C Yukon 2WD V8-5.7L VIN R (1999)
Fuel Tank Pressure Sensor: Service and Repair
FUEL TANK PRESSURE SENSOR REMOVAL
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Disconnect the negative battery cable.
2. Relieve the fuel pressure.
3. Lower the fuel tank.
4. Drain the fuel tank.
5. Remove the fuel tank.
6. Disconnect the Fuel lank Vapor Pressure Sensor electrical connector.
7. Remove the Fuel Tank Vapor Pressure sensor from the fuel tank housing.
FUEL TANK PRESSURE SENSOR INSTALLATION
1. Install the Fuel Tank Vapor Pressure Sensor on the fuel tank.
2. Reconnect the Fuel Tank Vapor Pressure Sensor electrical connector.
3. Install the fuel tank.
4. Connect the negative battery cable.
