C Yukon 2WD V8-5.7L VIN R (1999)
3. Install the oil pan gasket to the pan.
4. Install the magnet into the bottom of the pan.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the oil pan to the transmission with seventeen bolts.
-
Tighten the oil pan bolts to 11 Nm (97 inch lbs.).
6. Apply a small amount of sealant GM P/N 12346004 to the treads of the drain plug.
7. Install the oil pan drain plug.
-
Tighten the oil pan drain plug to 18 Nm (13 ft. lbs.).
8. Install Dextron Automatic Transmission Fluid. Refer to Fluid Capacity.
9. Lower the vehicle.