C Yukon 2WD V8-5.7L VIN R (1999)
![background image](/gmc/c_yukon_2wd/v8-5.7l_vin_r/Page-402003.png)
3. Install the HO2S sensor harness connector.
4. Install the HO2S sensor connector heat shield if necessary.
5. Lower the vehicle.
6. Connect the negative battery cable.
3. Install the HO2S sensor harness connector.
4. Install the HO2S sensor connector heat shield if necessary.
5. Lower the vehicle.
6. Connect the negative battery cable.