C Yukon 2WD V8-5.7L VIN R (1999)
Suspension Strut / Shock Absorber: Service and Repair
Rear Shock Absorber
Shock Absorber Replacement
REMOVAL PROCEDURE
1. Raise the vehicle on a hoist.
2. Remove the following parts from the frame bracket:
-
The upper shock nut (3)
-
The bolt (1)
3. Remove the following parts from the axle bracket:
-
The lower shock nut (6)
-
The washer (5)
-
The bolt (2)
4. Remove the shock absorber (4) from the vehicle.
Notice: Original equipment shock absorbers serve additionally as suspension drop cutoffs. Replacement shock absorbers must have a built in
suspension cutoff feature and must not be longer than original shocks when they are fully extended or serious vehicle or component damage could
result.
INSTALLATION PROCEDURE
1. Install the shock absorber (4) to the vehicle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the following parts:
2.1. The upper shock bolt (2)
2.2. The washer (5)