Canyon 2WD L4-2.9L (2008)
Notice: Refer to Fastener Notice.
3. Install the screws retaining the antenna base.
Tighten the screws to 7.5 N.m (66 lb in).
4. Install the antenna mast. Refer to Fixed Antenna Mast Replacement (See: Antenna Mast/Service and Repair) .
5. Remove the mechanics wire from the antenna cable (1).
6. Install the grommet to the hinge pillar.
7. Connect the radio antenna cable (1) to the extension cable.
8. Install the I/P compartment door. Refer to Instrument Panel Compartment Door Replacement (See: Body and Frame/Interior Moulding /
Trim/Glove Compartment/Service and Repair/Removal and Replacement) .
9. Install the right hinge pillar trim panel. Refer to Body Hinge Pillar Trim Panel Replacement - Left Side (See: Body and Frame/Interior Moulding /
Trim/Trim Panel/Service and Repair) .
10. Install the right front door sill plate. Refer to Front Side Door Sill Plate Replacement (See: Body and Frame/Interior Moulding / Trim/Scuff
Plate/Service and Repair) .