Canyon 2WD L4-2.9L (2008)
2. Position the window regulator to the inner panel by sliding the regulator bolts (1) into the keyhole slots in the inner panel.
Notice: Refer to Fastener Notice (See: Service Precautions/Vehicle Damage Warnings/Fastener Notice) .
3. Install the fastener retaining the front door window regulator to the door.
Tighten the front window regulator fasteners to 9 N.m (80 lb in).
4. Connect the electrical connector to the window regulator motor, if equipped with A31.
5. Install the front door window. Refer to Front Side Door Window Replacement (See: Front Door Window Glass/Service and Repair) .
6. Install the bolts retaining the window to the window regulator.
Tighten the front door window bolts to 9 N.m (80 lb in).
7. Install the front door water deflector. Refer to Front Side Door Water Deflector Replacement (See: Front Door Panel/Service and Repair) .
8. Install the front door trim panel. Refer to Front Side Door Trim Panel Replacement (See: Front Door Panel/Service and Repair) .